Please make sure ports 6090 and 6092 are open on Master and Slave in the firewalls
Also make sure TestComplete or TestExecute (whichever you chose to use) is working correctly on the slave machine before starting the distributed test
Good luck
-Lino
Ive followed the setup for the firewalls - inbound and outbound rules. Ive tried those specific ports for both local and remote ports, and then All Ports for both. I get the same result.
Thanks for your reply. Is there anything else I can check?
I will recommend 2 more things and hope it will help you
1- Try using the IP address instead of the machine name and see if that solves the problem
2- Make sure the version of TestComplete and/or TextExecute are IDENTICAL between the master and the slave.
Cheers
Lino
This may or may not be the issue - does the host machine need to have TC or TE installed just to pass the 'Verify' process on the Host tab? The remote host Im trying to verify connectivity to doesnt have either installed.
Im working with a trial license so only have one instance of TC installed.
