Forum Discussion

stein_oddvar_ra's avatar
stein_oddvar_ra
Contributor
6 years ago

Distributed testing across different Windows versions

Hi, We are planning to upgrade our test clients to Windows 10, but due to HW limitations, we cannot upgrade everything at once. Is it possible to have a setup where the TestComplete Server is runni...
  • stein_oddvar_ra's avatar
    stein_oddvar_ra
    6 years ago

    Yes. This answers my question. And I have managed to make it work.

     

    We have floating licenses for TestExecute on the slave, and node locked licenses on the master.

     

    The setup did not work at first, and I could not find out why. Verifying the slave in the host node failed with "Incompatible server version". After debugging, we found out that the TestComplete 12 installation on the Windows 10 machines did not install the x64 version. When we ran the installer again, we did get x64-editions of TestComplete. Then we were able to connect to the slave without issues.

mortenb123's avatar
mortenb123
Contributor
6 years ago

if you have a floating license you can run in both win10 and win7, just make sure they do not run at the same time. TestComplete can run fine from commandline/scheduler with the same parameters as TestExecute.

 

We have some issues with win10 WFC comboboxes though, where we are unable to find the Text.OleValue and OleStr in win10, but working fine in win7.

 

I recommend using https://aka.ms/accessibilityinsights-windows/download to see if your widgets are compliant.

And bug the developers if they are not. It also makes TestCompletes "preparing an object recognition hint" much faster.

 

  • TanyaYatskovska's avatar
    TanyaYatskovska
    SmartBear Alumni (Retired)
    6 years ago

    Thanks for the help, mortenb123, AlexKaras!

     

    stein_oddvar_ra, is this what you were looking for?

     

     

    • stein_oddvar_ra's avatar
      stein_oddvar_ra
      Contributor
      6 years ago

      Yes. This answers my question. And I have managed to make it work.

       

      We have floating licenses for TestExecute on the slave, and node locked licenses on the master.

       

      The setup did not work at first, and I could not find out why. Verifying the slave in the host node failed with "Incompatible server version". After debugging, we found out that the TestComplete 12 installation on the Windows 10 machines did not install the x64 version. When we ran the installer again, we did get x64-editions of TestComplete. Then we were able to connect to the slave without issues.