Sync Zephyr releases with Jira releases or sprints
As a test lead/manager, I'd like Zephyr to automatically create new releases and sync Stories by watching Jira for new releases (or sprints) so that, when I create a new release (or sprint) in Jira, a new release is created in Zephyr and the Stories magically show up. OLD ID:- ZENT-I-39New Idea219Views3likes0CommentsPlease add a "JUMP TO PATH" button to view location in folder while searching test cases.
Having the ability to view the Folder path per entry either by a column or by a button to FIND in Folder Hierarchy. Having this in the compare, search or just view of a list of test cases will allow for easier navigation. The workaround I use is to EXPORT that test case or group of test cases, then view each path in the EXPORT. If Zephyr can export it, why not add it to the GUI for Test Repository and also the COMPARE GUI, so that we can easily find the source location of that Test case?BrentWhitmore2 years agoRegular VisitorNew Idea361Views3likes0CommentsManage predefine tags list
As administrator, I've noticed that each tester create his own tags and than I have lots of double tags, f.e. Sanity and sanity, Regression and regression etc. I want to have the ability to control it by managing a predefine tags list, thus the tester can only select from this closed list. Also it could be nice if I can delete such tags I don't want to use.eran2 years agoSenior MemberNew Idea247Views2likes0CommentsCreate a test phase directly from repository folder
As a tester, I get a story (requirement\new feature) to test, then: 1. I begin to design the test cases I going to run and build the test tree under the repository. 2. Map the testing to the requirement. 3. Open a test phase under the test cycle for this story. 4. Move to test execution to run the test phase. I want the option to create test phase directly from the repository folder. Furthermore, I usually, during the test execution, think of more scenarios to test, and I need to go the whole process again from 1-4 for the new scenarios. I want the option to run the test case as part of the phase, from the test case in the repository level.eran10 months agoSenior Member11Views1like0CommentsControl over new version and un-do/re-do of changes made
When editing a test case, I don't always want a new version created. It would be nice to have a way to un-do or re-do changes before committing a new version to the repository. (it would be helpful to be able to un-do an action such as making changes to or deleting a test step)New Idea209Views2likes0CommentsAutomation: Create separate Test Phases for each execution under the same Test Cycle
Currently, Vortex allows either reusing the same Test Cycle/Test Phase for all executions, or creating a new Test Cycle for each execution. However, as a User, I'd like to have Vortex creating separate Test Phases for each execution so that I can report on how many times the automation has been run. OLD ID :-ZENT-I-247Selected for Development51Views1like2CommentsBulk update and sync test case to the latest version
As a tester, I need a way to easily bulk update (or sync) my test cases to the latest version within the Test Case Repositories. You can easily do this in test execution when a test case does not match the version in the test repository. It would be very helpful to have this same sync button in the test case repositories and also the global repository.Accepted for Discussion267Views2likes2CommentsSub-string search in testcase advanced mode search
Advanced search is not working with sub-string/word, for example, we have a name field with the value "15.15.15.15 R2R Prepare Withholding Tax return_F1515 - Display [1]". If ZQL: name ~ "15.15.15.15" we get the results listed OK If ZQL: name ~ "15.15.15" the result list is empty. It is not always possible to know the whole word in a test case name. Then you can not get the list of test cases you are looking for. This is more of an error than an enhancement request since in general web-based tools work with sub-string search. In the same way, other search functions in *Zephyr works with sub-string search. Ex in the Admin part, search for a project to the user, and in Dashboard when you search for the project. OLD ID:- ZENT-I-416New Idea165Views2likes0CommentsTest Repo and Execution Export data - Add the option to remove exporting test steps
For large exports, I would like the option to not export the test steps when pulling data from the Test Repository or Test Execution exports Use case - I need to run a regular report on how many test cases are automated or manual across my project test repository. However with the test steps also being exporting, I have to clean up around 5k of lines each time. **The current dashboard gadget only reports on manual vs automated on the release level. There's no easy way to pull this data for your Project or Global repositoriesNew Idea109Views1like0CommentsAdd the ability to report on test case custom fields
It would be helpful to be able to report on custom field data added to test cases, either in a gadget or through test case export. use case - I have a custom field enabled to select whether a test case is "front-end or back-end." I would like the ability to report on how many test cases have been marked with this custom fieldAccepted for Discussion113Views1like1CommentMake the UI more intuitive for the copy/paste options for test steps
The UI is not very intuitive when it comes to copy/pasting test steps. The top button pastes to the bottom, however you don't really know that unless you're used to it or you hover over the button. The option to paste above only exists on the test step, however you don't really know this unless you hover over the button. It would be helpful to also have the option to paste at the bottom on the test step as well.New Idea141Views1like0CommentsNeed more information in some audit log entries to improve the sudit trail
A user recently contacted me, saying that a significant proportion of the users within a project were no longer memebers of the project. Investigating the audit log to understand what had happened, I noticed that when users are added to or deleted from a project, this is not really recorded in the audit log. There are entries that say user 'X' has updated project 'Y' but it doesn't say what was updated. Similarly within the system entity, often log entries only say user 'X' has made a change, without clarifying what has been changed. I would like these entries to be more informativesouthwr7 months agoRegular VisitorNew Idea97Views1like0CommentsRetain folder structure on refresh in Zephyr Enterprise
When we navigate and select a particular test case within a folder there are 2 issues that we are seeing: 1. Folder structure is not retained when the same URL is refreshed or opened in another tab of the browser. 2. After clicking on the test case, the URL where the test case details and test case description are shown, can not be retained on click of a refresh or opening in the other tab in the browser. It is taking to test case list page. OLD ID:-ZENT-I-423Accepted for Discussion269Views2likes1CommentRequest for Zephyr Enterprise plugin for Confluence
we would like to see the test case links and pass/fail execution status in Confluence reporting (like in Jira filter results) or some other new macros, just like you can see on the view screen of Requirements in iTrack (via the Jira Integration: Zephyr Enterprise plugin). OLD ID:- ZENT-I-408New Idea253Views2likes0CommentsPossibility to order regarding Order ID in test execution
In test planning I have the possibility to order testcases regarding Order ID. But this ordering is not taken over to test execution, in case the test phase was created by "Create New". If creating a test phase from Repository both test planning and test execution have the same order. But not if using "Create New". We need to have the possibility to order testcases and execute them in the same order, independent of how to create a phase. For more details seecase #00542683.sindy-sc2 years agoNew MemberNew Idea218Views2likes0CommentsAllow users to set their email notification preferences
Currently, when email notifications are enabled, all Zephyr users receive all available notification emails automatically. As a user, I'd like the ability to set my own preferences to receive only the notifications I care about. For example, I may want to receive a notification only when a test case is assigned to me and not receive any emails when a test case is moved or modified, etc. OLD ID:- ZENT-I-120234Views2likes0CommentsRequest for a Third folder Field for Requirements Jira Sync config
The team, which is using ZETM extensively for the Northrim Program and other projects, is requesting a 3rd field to use for organizing Requirements that sync from Jira. Currently, in the Jira Sync Config form, there is a top-level folder name, then Field 1 and Field 2 options for organizing. They would like a Field 3 to give another layer of folders. OLD ID:- ZENT-I-407New Idea201Views2likes0CommentsEdit Test Case button always displayed on Test Execution panel
I’m executing a lengthy test script and I’m updating it at the same time. I find myself regularly pressing the Top button to access the Edit Test Case button, making then saving an edit, and then having to scroll back to the individual steps. I suggest making this button easier access by having it always visible on the interface.Barb1013886 months agoRegular Visitor93Views1like0CommentsUnable to create test execution status report for specific test cycle from specific folder
Hi, I want to create a report/test execution status for a specific cycle in Zephyr Enterprise tool. I tried using "Execution Analysis Snapshot' gadget ,am getting test execution status report entire release wise instead of cycle wise. Is it possible to add some more custom filters to get specific cycle execution report from specific folder in this gadget? Also createdCase # 00571672 with screen sharing records. ThanksAbhijeet7 months agoRegular Visitor162Views1like1Commentability to set email notification "when a user has been added to Zephyr enterprise" as optional
Currently, whenever a user is created in Zephyr enterprise, an email is sent to the user's email account with the instructions on how to access zephyr. We would like a feature to make this feature optional or send a custom message to the new user with the instructions to access zephyr enterprise.amanandh2 years agoOccasional Visitor247Views2likes0CommentsAllow more actions in search view for test repository and requirements areas
When you search for a test, is not possible to do anything, except from exporting. While, it would be desirable to have the same actions you have in the folder view plus the possibility to move search results in a specific folder, for instance, for search results in project folder to the release folder. This is very important when there are more test cases that you need to include in a release because are related features that need to be checked.mpicozzi_eidos7 months agoRegular VisitorImplemented225Views2likes2CommentsSupport filtering gadgets by custom fields
Currently, there's no capability to filter gadgets by specific custom fields. As a user, I need the ability to filter by custom fields to comply with my company's use of custom fields across all projects. Specifically, this would be important for the "Test Execution by Cycle" and "Test Execution Snapshot" gadgets. OLD ID:- ZENT-I-250New Idea290Views2likes1CommentZephyr - Schedule Automation Testing Capability
Zephyr has the ability to execute Automation Test Runs using TestComplete or TestExecute. This is a useful platform to control test runs and import results into Zephyr. However the Vortex option on Zephyr feels a little under developed. It would be nice to have this developed further to allow the scheuling of test runs. For example:- - Run test 1 - Every Monday at 2am - Run Test 2 - On the 2nd of every money at 2am - Also include a Automation Test Run Execution list of all the jobs scheduled and a log of those executed. Is it possible to include this feature?LRuoc2 years agoContributor411Views2likes0CommentsMore options for configuration of the release summary and test planning calendars
Currently, the release summary and test planning calendars are limited to showing either Monthly or Weekly (Sun-Sat). As a test manager, I'd like the ability to customize these calendars to: Have more date range display options such as quarter, half a year, full year, or a custom date range Show only work week (Mon - Fri) Change week configuration for International calendar settings (ISO8601), i.e., "Mon-Sun" OLD ID:- ZENT-I-305182Views2likes0CommentsCorrect error that shows incorrect path to requirement
Users that need to edit/remove requirement needs to find the requirement in the folder structure. When looking at the path shown in the search view, the paths do not exist in the folder view. If the folder structure is complex it takes a lot of time to go through them folder by folder to find the requirement. OLD ID:- ZENT-I-394Implemented471Views2likes3CommentsProvide direct native support for getting NUnit test results into Zephyr Enterprise without hassle
Please add native support for importing regular NUnit results files, as you've done for other testing tools' results files. Given we are a company that does a lot of C#/.NET development and uses and runs thousands of NUnit test cases When we reun our NUnit test cases Then we should be able to import NUnit results directly into Zephyr Enterprise, without having to either: re-run the tests with special parameters, or use an external conversion tool to make the NUnit results look like JUnit results. Adding the requirement to run (or re-run) test cases with a lot of extra parameters (e.g. "--result=junit-results.xml;transform=nunit3-junit.xslt" which results in a non-standard NUnit result), or execute a third-party external conversion tool (potentially unsupported now), makes the process of importing NUnit results into Zephyr Enterprise much more complex than it needs to be. Using Zephyr Enterprise with NUnit should be easier / more convenient and support a standard workflow.BrianDallHMH7 months agoNew Contributor353Views1like2CommentsImport new Test Steps section (Test Steps, Test Data, and Expected Results) to an existing Test Case
The user should be able to create an Import map and file to load new Test Steps (at least Test Steps, Test Data, and Excepted results) to a pre-existing Test Case in the Test Repository. Maybe by using the Test Case Id as a unique identifier for the Import processing.nickramsey952 years agoNew Member502Views2likes1CommentSelect multiple cycles for export in test execution
The ability to select more than 1 cycle in test execution and export would be helpful or possibly even better a checkbox for each cycle folder and subfolders so it is possible to only export what you need(particularly if you need multiple cycle folders or sub folders within multiple cycles). Often times I need to export multiple cycle folders so I either have to download each separately or export the entire release neither is particularly efficient.wolfev2 years agoOccasional VisitorNew Idea243Views2likes0CommentsZephyr Scale - linking a test case to a Confluence page add a link back to the test case
When lining a test case back to a confluence page currently a link does not get created from the confluence page back to the test case. Any link back to the test case is currently a manual process using a url link.JustinReid2 years agoRegular VisitorNew Idea118Views1like0CommentsZephyr Scale - Ability to name test executions
When creating a new test execution for a test case in a test cycle there is currently no way to differentiate between the different executions. It would be helpful if a test execution could be named to be more unique.JustinReid2 years agoRegular VisitorNew Idea89Views1like0CommentsAdd an four eye concept for test case deleting
To make it more secure that one or more test cases will be deleted erroneously it would be good to have the possibility to configure an four eye principe for deleting test cases. If user A decide to delete a test case user B get a notification that user A want to delete one or more TC's. Only when both users confirm the deletion will be executed.mum4bosch2 years agoNew ContributorNew Idea224Views1like0CommentsIt should be possible to integrate test cases into a review process.
For a better workflow it should be possible to integrate a test case into a review process. At a field for the status of a test case (Draft, Review, Approved) and the possibility to assign the test case to a user who is responsible for the review.mum4bosch2 years agoNew ContributorNew Idea198Views1like0CommentsWhen searching in Test Execution need column for Folder path
When performing a ZQL search in the Test Execution module there is no column available to see under which folder the Test Execution is located. We need a way to see under which tree structure the searched Test Execution is located. This would be helpful when multiple test executions are displayed in the result set.josh20235 months agoRegular VisitorImplemented112Views1like2CommentsNeed more granular Admin permissions to allow for multi-tier support
When defining roles in Zephyr Enterprise, the application only allows for a user to either have full administrative permissions for any Admin level module (i.e. System Setup, User Setup, Group Setup, Project Setup or Defect Admin) or not. For larger enterprise organizations there is a need to create admin level roles that would provide a user with either read-only or create permissions, but would prevent that user from performing any kind of delete operations. Use Case: A large scale company can have multiple divisions/sectors each with thousands of users supporting hundreds of products. Each division/sector requires their own instance of Zephyr Enterprise due to user volume, development methodologies, configuration needs, etc. One size doesn't fit all in this case. Each division/sector requires different setup, reporting of different metrics, customizations, etc. Due to the need to support multiple divisions/sectors a number of administrative staff are required to meet all the demands of the various user groups. However, to reduce risk of user error not all administrative staff require full admin level privilege (i.e. View, Create, Update or Delete) for all admin level modules. Some staff only need read-only permissions to view/pull setup information, project information, user information, etc. for reporting and compliance validation. Some staff need permission to create (i.e. projects, new custom fields, add users, add groups, etc.) to support user needs. Some staff need permissions to update values (i.e. custom fields [i.e. picklist]) to support user needs. Small number of Subject Matter Expert (SME) staff need permission to delete (i.e. custom fields, values in custom fields, projects, users, groups, remove settings, etc.) to support company needs. By providing the ability to grant View, Create, Update or Delete permissions to any Admin module, custom roles could be configured to provide only the permissions needed for multi-tier level support teams (i.e. Level 1 Support, Level 2 Support or Level 3 Support). Example of the Role permissions per Admin module: System Setup System Config View Update Delete Authentication View Update Delete Jira Integration View Create (or Add) Update Delete Customizations View Create (or Add) *Note: this permission should also allow a user to add new values to existing Fields (i.e. picklist) Resources Roles Projects Fields Requirements Fields Test Cases Fields Test Cases Execution Status Test Cases Step Execution Status Update Test Cases Estimated Time Test Cases Test Repo Configuration Test Cases Bulk Status Update Test Cases Priority Field Trend Data Collection Scheduling Advanced Miscellaneous Advanced Announcement Banner Dashboard and Report Gadget Refresh Rate Execute (for Indexing) Delete (for Roles or Fields) API Token View Create Delete (i.e. Remove) About Zephyr View Create *Note: This would allow the user to Download License Usage, Create Support Zip or Export Audit Log. User Setup View Create (or Add) Update (or Edit User details) Delete (or Disable Accounts) Group Setup View Create (or Add) *Note: This would include the ability to Import Groups Update *Note: This would include the ability to sync groups as well as Edit Group Delete Project Setup View Create (or Add) Update *Note: This would include Edit Project, Test Case Sharing, Assign Group to project with Roles and Assign Users to project with Roles Backup *Note: This would provide access to Backup and Restore and Recurring Backup Defect Admin View Create (or Add) Update Deletejosh20232 years agoRegular VisitorNew Idea141Views1like0CommentsAuto-scroll within Administration
Most of the Administration section requires the user to scroll down to a specific area after making a selection. For example, in the Project Admin section, after clicking on a project, the user has to manually scroll down to edit or update the project. This is also the case in groups, user set up, role creation etc. There are multiple frames within a page, which requires the user move outside the frame and to scroll down after making a selection, this is not intuitive or natural for most users. Ideally, the application should auto-scroll after making a selection.New Idea362Views1like1CommentFeature request: Planned vs Executed report broken down by Test Cycle and Test Phase
There is request from MCANS users to enhance the Planned vs Executed report, so that it can be broken down by Test Cycle and Test Phase, currently it only shows a total aggregation for a whole Release. Ultimately, MCANS leadership is requesting, Plan vs. Executed status for each NFs with configurable week by week/particular day report. OLD ID :-ZENT-I-453Accepted for Discussion109Views1like1CommentUse keyboard TAB to move between test steps
Today when writing test cases in Zepyr Enterprise Test planning there is only the option to use the mouse to move between the test steps. Since it reloads often, this is a very slow process. If the keyboard features like TAB could be user it would be much faster to write a test case. Another improvement would be to display the test step text using the same Font, today there is a mix which gives a bad user experience.annfar7 months agoSenior Member200Views1like1CommentDevelop the Release overview in Zephyr Enterprise
Release Summary, there is a dashboard showing the status for the release. When hovering over a test cycle, info is displayed about the cycle i.e Pass, fail, Blocked, N/A. An advantage would be to click on the information and directly be taken to the Test planning to see who the test case is assigned, to and see also what could be blocking. Currently the only way to see more info is to go to Test Execution and search for the test case. Another benefit would be to also see mapped requirements.annfar2 years agoSenior MemberNew Idea237Views1like0CommentsPlan vs Executed & Execution Analysis gadget does not filter out the status which is not selected
As a User when I configure the Gadget Plan vs Executed and Execution analysis with only few status it is considering all status and showing them in others I would like to see only what status is filtered invinniew7 months agoStaffAccepted for Discussion763Views1like5CommentsNeed a utility for Jira to remove inactive links to Zephyr test cases
We need a utility for Jira (could be a script to execute manually, periodically), which can go through Test Links and remove those that are incorrect/inactive – e.g. Test is deleted in Zephyr but the link is still there. This may happen when there are intermittent connection issues. Having incorrect/inactive links in Jira may cause audit issues. The utility can be executed with a parameter Jira JQL query that returns requirements to be cleaned up. OLD ID:-ZENT-I-370New Idea165Views1like0CommentsImprove the feature of un-mapping a Test from a requirement
Currently, there is no simple way to remove the existing mapping between a Test and a Requirement. This can only be done individually for each test through several non-intuitive steps. We need a more efficiently designed functionality, which allows us to un-map a Test from a Requirement and vice versa individually and in bulk. OLD ID:-ZENT-I-366New Idea159Views1like0CommentsAbility to link a Defect to a Requirement in Jira automatically
As Zephyr User When linking a Defect to a Test (Execution) While the Test being linked has been mapped to Jira requirement(s) in Zephyr I want the same Defect to get linked to this Requirement(s) in Jira automatically using Jira link type 'blocks' Link type can be configurable in Custom Configurations. OLD ID:-ZENT-I-369New Idea149Views1like0CommentsTests with mandatory Custom Fields being empty or incorrect should not be imported
We have several mandatory Custom Fields. Some of them are Picklist type. When users create Excel files for import, they often either miss mandatory fields completely or use wrong values. Still, these tests are imported with mandatory fields being empty upon import. Import feature should perform validation, fail and return an error in such cases OLD ID:-ZENT-I-365New Idea184Views1like0CommentsZephyr - Need feature to track audit logs by Project
Hello team, We are having difficulty to filter out audit logs from Zephyr UI. We have the option to search by Entity, Operation, User & date range. This search won't help us to find out logs where different project related activities performed across the Zephyr Instance. So in this case, we need to export logs in excel and search logs by project. It will be good if we have a project filter in Audit logs, where we can have results by project as well.sukanta11 months agoRegular VisitorNew Idea276Views1like1CommentWant a persistent filter for testcase export
If I want to export a number of test cases, I need to set the filter each time, which is annoying, especially if I want to do it several times or tweak my selections. It would be great if the filter selections were saved, at least within a session OLD ID:- ZENT-I-426165Views1like0Comments“Prev” or “Next” functionality in zephyr search page
1. "Prev" or "Next" buttons in the bottom right corner should move the group of pages to left or right respectively, instead the current functionality in Zephyr moves single pages forward or backward which is similar to clicking on the page number. 2. Also currently it is giving 4 pages at a time when there are more test cases then the navigation is very difficult with the current functionality of "Prev" or "Next". OLD ID:- ZENT-I-418142Views1like0Comments