Ask a Question

14.3 -> 14.4 Upgrade Project Compatibility?

SOLVED
scot1967
Frequent Contributor

14.3 -> 14.4 Upgrade Project Compatibility?

Will projects/suites from version 14.3 be comptible with 14.4 and vice versa?  I see there is a note about project conversion but I am not sure if this applies to a 14.3 to 14.4 cvonversion.

 

Thanks!

4 REPLIES 4
Marsha_R
Community Hero

It has been my experience that anything within a version is compatible (anything that starts with 14 is cross compatible, going up to 15 would not be).  That being said, I also always always always back up the old version in its entirety and then upgrade.  You'll find out quick enough if there's a problem with conversion or anything else and you'll have a safe shiny backup to revert to.


Marsha_R
[Community Hero]
____
[Community Heroes] are not employed by SmartBear Software but
are just volunteers who have some experience with the tools by SmartBear Software
and a desire to help others. Posts made by [Community Heroes]
may differ from the official policies of SmartBear Software and should be treated
as the own private opinion of their authors and under no circumstances as an
official answer from SmartBear Software.
The [Community Hero] signature is used with permission by SmartBear Software.
https://community.smartbear.com/t5/custom/page/page-id/hall-of-fame
scot1967
Frequent Contributor

Thanks @Marsha_R for the response.  I was waiting for others to respond possibly with a firm yes or no here.  It was marked as accepted for me I assume by the admin?  I know the best practices.  Like you I expect that a minor update should be forward and backward compatible however I was trying to make sure I could indeed update incrementally and not have to do all my setups at once.

 

Thanks again,

 

Scott H.

   

I can give you a yes for me, but since we are not SmartBear employees, we can't guarantee anything.  If you don't want to try it yourself and find out, then you can always contact Support directly.

https://support.smartbear.com/testcomplete/

 

I'm sure it was the admin marking the answer because it's correct.  Also you can check the kudos to see who agreed with me.  I can say for me that it's been the case since TestComplete version 8.


Marsha_R
[Community Hero]
____
[Community Heroes] are not employed by SmartBear Software but
are just volunteers who have some experience with the tools by SmartBear Software
and a desire to help others. Posts made by [Community Heroes]
may differ from the official policies of SmartBear Software and should be treated
as the own private opinion of their authors and under no circumstances as an
official answer from SmartBear Software.
The [Community Hero] signature is used with permission by SmartBear Software.
https://community.smartbear.com/t5/custom/page/page-id/hall-of-fame
scot1967
Frequent Contributor

Yes,  I was just looking for someone who had already gone through the upgrade to chime in.

 

Thanks!

cancel
Showing results for 
Search instead for 
Did you mean: