Forum Discussion

Irvingoliveira's avatar
Irvingoliveira
Occasional Contributor
4 years ago

Is there any way to set a different rdp port on the testcomplete call in jenkinsfile?

Hello, everybody!   I actually have a machine that is configured as a jenkins slave to run desktop tests. The problem is that this machine is from a supplier, and they use as standard the port 5049...
  • sonya_m's avatar
    sonya_m
    4 years ago

    Irvingoliveira thank you for sharing this workaround!

    I would recommend contacting the support team at this point for a deeper investigation.

tphillips's avatar
tphillips
Frequent Contributor
4 years ago

I don't know a lot about TestComplete and Jenkins, but I will try to help out.

 

Which method of integration are you using with TestComplete and Jenkins?

Is the issue only with TestComplete, or is it the way Jenkins connects to the slave? How is Jenkins connecting to the slave node?

  • Irvingoliveira's avatar
    Irvingoliveira
    Occasional Contributor
    4 years ago

    Hello, tphillips!

     

    I am using the Testcomplete support plugin. The jenkins agent is installed as a service on slave. The jenkins is connecting on the machine normally. The problem is when the testecomplete (testexecute) tries to start.

    • Irvingoliveira's avatar
      Irvingoliveira
      Occasional Contributor
      4 years ago

      Just one more information: I created another user in this machine, then, i oppened this new user and I connected it in the test user by rdp loopback (127.0.0.2:50491). So, I closed my rdp connection tool. Basically, I forced the interactive session to be always opened. This way the test works. But, it performance is horrible. 

      • sonya_m's avatar
        sonya_m
        SmartBear Alumni (Retired)
        4 years ago

        Irvingoliveira thank you for sharing this workaround!

        I would recommend contacting the support team at this point for a deeper investigation.