Forum Discussion

kalpana_seagate's avatar
kalpana_seagate
Occasional Contributor
9 years ago

ccollab admin review set-participants doesn't work if user id is in digits

When the user name contains digits the ccollab set-setparticipants doesn't work, but the same works if user name has only alphabets. see error below,   ccollab admin review set-participants 1593 --...
  • OlegB's avatar
    OlegB
    9 years ago

    Hello kalpana_seagate,

     

    We have reproduced such an issue in our labs and registered a bug in our bug tracking system (COLLAB-1877). So, our R&D team is aware of the problem now and will try to solve it.

     

    In addition, I have found a possible workaround for you: you can use one of the previous GUI client (9.0.x-9.1.x) versions. Here are copies of my tests with the v.9.1.9101 GUI client:

     

    C:\Users\oleg.beriashvili>ccollab admin review set-participants 3 --participant

    Author=admins

    Connecting to Collaborator Server http://127.0.0.1:8080

    Connected as: ---- -- - (admins)

    Loading review ID 3.

    Found Role 'Author'

    Found User 'admins'

    Resolved participant assignment 'Author'='---- -- -'

    Set 1 participants

     

    And I also checked your previous problem with the "ccollab login" command and it works too:

     

    C:\Users\oleg.beriashvili>ccollab login http://127.0.0.1:8080 admins password

    Trying to login with new configuration

    Connecting to Collaborator Server http://127.0.0.1:8080

    Connected as: ---- -- - (admins)

     

    New configuration worked - saving configuration settings

    Configuration key 'url' saved.

    Configuration key 'user' saved.

    Configuration key 'server-proxy-host' cleared.

    Configuration key 'server-proxy-port' cleared..

     

    Please download the one of these versions of the GUI client using the link below and check how it works:

    https://support.smartbear.com/downloads/collaborator/all-installers/

OlegB's avatar
OlegB
SmartBear Alumni (Retired)

Hello kalpana_seagate,

 

We have reproduced such an issue in our labs and registered a bug in our bug tracking system (COLLAB-1877). So, our R&D team is aware of the problem now and will try to solve it.

 

In addition, I have found a possible workaround for you: you can use one of the previous GUI client (9.0.x-9.1.x) versions. Here are copies of my tests with the v.9.1.9101 GUI client:

 

C:\Users\oleg.beriashvili>ccollab admin review set-participants 3 --participant

Author=admins

Connecting to Collaborator Server http://127.0.0.1:8080

Connected as: ---- -- - (admins)

Loading review ID 3.

Found Role 'Author'

Found User 'admins'

Resolved participant assignment 'Author'='---- -- -'

Set 1 participants

 

And I also checked your previous problem with the "ccollab login" command and it works too:

 

C:\Users\oleg.beriashvili>ccollab login http://127.0.0.1:8080 admins password

Trying to login with new configuration

Connecting to Collaborator Server http://127.0.0.1:8080

Connected as: ---- -- - (admins)

 

New configuration worked - saving configuration settings

Configuration key 'url' saved.

Configuration key 'user' saved.

Configuration key 'server-proxy-host' cleared.

Configuration key 'server-proxy-port' cleared..

 

Please download the one of these versions of the GUI client using the link below and check how it works:

https://support.smartbear.com/downloads/collaborator/all-installers/

kalpana_seagate's avatar
kalpana_seagate
Occasional Contributor
9 years ago

I'm on version 10 and both client and server are installed on the same machine. Should i roll back both my server and client to older version?

  • OlegB's avatar
    OlegB
    SmartBear Alumni (Retired)
    9 years ago

    Hello kalpana_seagate,

     

    You can use the GUI client version lower than the server one. Roll back the client and check how this works. Please let me know if you face any issues, I will be happy to help you.

    • kalpana_seagate's avatar
      kalpana_seagate
      Occasional Contributor
      9 years ago

      Hi Oleg,

       

      I rolled back the client to Version 9.1.9101 and tested some commands and they are working fine on test machine. Will run some more test and roll back client on production machine. Thanks for your help.

       

      Regards,

      Kalpana