How to Change the think time in runtime

[bvenku1982]

I have custome Load profile as below

Base users 10 will run for 5 min, rampup to 25 users run for 5 min and rampup to 50 users and run for 5 min

i need different thinktime for each ramup 

Example : when 10 vusers are running i need thinktime as 200ms

                 when 25 vusers are running i need thinktime as 300ms

                 when 50 vusers are running i need thinktime as 400ms

Ramp is attached

[TanyaYatskovska]

Hi Bvenku1982,

As far as I see, you can set up different Think Time for each load profile. So, when selecting the number of VUs, you can specify the time you need. Here is the article describing this option in detail:

http://readyapi.smartbear.com/loadui_ng/configure/thinktime/start

[bvenku1982]

I have only one load profile which is custom ....

if i have 3 different load profiles... all the three run at the same time....

but i want first the 10 users to run and then ramup to 25 user and run for some time and ramup to 50 users ......

[DmitryAleshin]

It's pretty clear what you want to check but not clear why you want to change think time. I could not imagine that a real user will start to think longer if your server will work under the pressure.

[DmitryAleshin]

You could also use scheduler and 3 different scenarios using the same test case as a target and different load and think time.