Forum Discussion

chico-uspto's avatar
chico-uspto
Occasional Contributor
7 years ago

running SoapUI Pro automated script from command-line (testrunner.bat)

Good morning,   I am running my Ready! API (version 2.3) automated script using the command-line (testrunner.bat). I would like to change the JAVA_OPTS variable and set a new value for -Xmx; I not...
  • sonya_m's avatar
    sonya_m
    7 years ago

    Hi Chico,

     

    Here's the answer I got from our technical specialist:

     

    The Xmx value is auto-calculated on each TestRunner run based on the following rule: it's set to half of available RAM, but not more than 4 Gb.
    E.g.
    If you have 4 Gb, Xmx is set to 2 Gb
    if you 16 Gb of RAM, Xmx is set to 4Gb

     

    Does it answer your question?

chico-uspto's avatar
chico-uspto
Occasional Contributor

Hi Technical team,  Any update on this question? I will appreciate your help. /Chico

sonya_m's avatar
sonya_m
SmartBear Alumni (Retired)
7 years ago

Hi, Chico,

I've consulted our technical specialists, and they've come up with the following solution:

 

 

Does this work for you?

  • chico-uspto's avatar
    chico-uspto
    Occasional Contributor
    7 years ago

    Hi Sonya_m,

     

    I had done and that is the way I currently executing the testrunner.bat.  But I thought that you can tell me from where READY_XMX parameter is getting it current value if I do not "rem" the line inside the testrunner.bat.

    My objective is to prevent other people open the testrunner.bat file to change the value of the READY_XMX parameter because they may unknowingly change other lines of the batch file.

     

    Can you ask your specialist contacts where READY_XMX  parameter gets its value without changing the testrunner.bat?

    Thank you for your help.

    /Chico

     

    • sonya_m's avatar
      sonya_m
      SmartBear Alumni (Retired)
      7 years ago

      Hi Chico,

       

      Here's the answer I got from our technical specialist:

       

      The Xmx value is auto-calculated on each TestRunner run based on the following rule: it's set to half of available RAM, but not more than 4 Gb.
      E.g.
      If you have 4 Gb, Xmx is set to 2 Gb
      if you 16 Gb of RAM, Xmx is set to 4Gb

       

      Does it answer your question?

      • chico-uspto's avatar
        chico-uspto
        Occasional Contributor
        7 years ago

        Hi Sonya, 

         

        Great! Yes, your response answered my question.

        Your help is appreciated.

        Thank you for the information and your time.

        /Chico