Hi,We are using the soapUI Pro 3.5.1 in our testing. On load test long run of the SOAPUI we have several issues which are mentioned below,1. If statistics are enabled(Load Test options> TestStep statistics enabled) then response time reported always very high. (Tested for more than 10 hours continuously)2. If statistics are disabled and run for more than 12 hours, SOAPUI gives out of memory issues. Also statistics are updated in the end of running all the test, If we need statistics in between its not possible to take the statistics.3. If logging is enabled in the loadtest options > Statistics log , then logs don't contain the details of each step. Below mentioned parameters which are in bold are not updated. 1 sec is Log interval. date,threads,elapsed,min,max,avg,last,cnt,tps,bytes,bps,err,reasonTest Step800 requests are sent per min to the server. Simple strategy, Test Delay 0, Random 0.0 and Limit is 1 Threads per run.Long run test is done by looping the 2 requests with in login sessions for 800 users. Loop value is provided such that long run is done for required time. Delay of 60s is provided with in loop.All the test are run from Windows 2003 server(2GB RAM)

Hi!hmm.. can you confirm these issues also with the newly released 4.0.0 version? If so, could you attach your project so we can try to reproduce?regards,/Oleeviware.com

i have some problems with load tests in 4.0.0 and 4.0.1Build soapui-pro-4.0.1-daily-2011-07-07-[1], Build Date 2011/07/07 02:30i have simple test case with 3 test steps.first is groovy to initialize some data.second is soap test step.third is groovy to verify response from second test step.the problem is, when i call this line in third test step:def response = context.expand( '${retrieveCdrs - Request 1#Response#declare namespace...blablabla...' )i don't get anything.log.info is empty.it works if i run this manually in test case, it also works if i loop test case continuously, but it doesn't work in load test!on the other hand, the same project works without any problems in version 3.6.2. i have paste the project if it helps enathing.please help.Beno

Hi Beno,have you checked the option "Do not disable Groovy Log" in the global UI Settings tab?regards,/Oleeviware.com

hi,yes, i did.if i put log.info "aaaaa" it's shown correctly, no problems with this.but if i use def response = context.expand(...) and try to show this, it's empty."log.info" is not a main problem at all.the problem is, when i try to call response and do some assertions in groovy right after the response was recieved in soap message, nothing is done because there is no response! well, it looks like this.but on the other hand, HTTP monitor shows me all responses correctly.i don't have any "events" configured on my project. SubmitListener.After... and stuff like this.i really don't know what could be the problem.it's not working in 4.0 and not in few latest nightly buidls. as i mentioned, everything works in 3.6.2 and perhaps also earlier versions, i didn't try them all.if project works on earlier version (not that old at all!) i don't see any reason why shall not with 4.0.0 and later. especialy since it's a very simple project with just 1 request and 2 simple groovys.man...i have something else for you.i tried another project and it has a problem with 4.0.x also!it has 3 soap requests. after each of them i put groovy with log.info response.1 of the groovys is returning me log.info response, other 2 are empty again. huh... project was created in 4.0.1 (cloned) and it doesn't work as it should in load test. when i import the same project in older soapui version it works again!i'll paste that project also.it's very simple.once again, if i run entire test suite or "Run this test Case" - i can use "loop" option also, there aren't any problems.but in a load test... problem.with best regards,beno

Hi Beno,It looks like you have set the "Max Results" option in the containing TestCase Options dialog to 0; please try setting this to a higher value (for example 100) to see if that helps.regards!/Oleeviware.com

Load test using SOAPUI issues | SmartBear Community

16 Replies

SmartBear_Suppo
Alumni
15 years ago
Hi,

hmm.. ok.. and could you attach the exact project you used to get this output?

thanks, sorry for the hassle...

/Ole
SmartBear Sweden
Beno_Iskratel
Frequent Contributor
15 years ago
sure, but the project is same as before.

if the problem is only on my side than f*** it...
i really don't know what could be wrong.
in load test, i don't get log outputs, in manual i have no problems.
and i also don't have any problems with older versions.
su-share-soapui-project.xml489 KB
SmartBear_Suppo
Alumni
15 years ago
Hi!

well, I still can't reproduce this, but it might be because I am using a mock service and not making calls to your "real" services (which I don't have access to..)

Would it be possible for you to send me three response messages, one for each request in the TestCase so I can try to simulate this exactly as you have it?

regards,

/Ole
SmartBear Sweden
Beno_Iskratel
Frequent Contributor
15 years ago
sure,

here are responses.

Beno
getSubscriberParameters.txt2 KB
getSubscriberSupplementaryServiceSet.txt1 KB
getSupplementaryServices.txt9 KB
SmartBear_Suppo
Alumni
15 years ago
Hi Beno,

Thanks! Unfortunately I still get the correct log-output when I use these responses, so I'm not sure how to proceed... if this is an urgent issue I guess we could try to schedule some kind of online meeting where we can look at the issue on your machine together!?

Let us know how you would like to move forward,

regards!

/Ole
SmartBear Stockholm
Beno_Iskratel
Frequent Contributor
15 years ago
no, it's not important anymore.
looks like i have some other problems, no idea whay and what kind of.
if i'll need anything i'll let you know.
sry for troubles.

regards,
beno

Forum Discussion

Load test using SOAPUI issues

16 Replies

Recent Discussions

Unable to authenticate license in Ready API Login button unresponsive

Assertions Panel issue to update assertions since update 3.63

ReadyAPI websocket plugin issue

Related Content

License issues

WSDL SOAPUI issue

issue using dictionary