Forum Discussion

TheEnd's avatar
TheEnd
Occasional Contributor
5 years ago

Groovy script Assertion

Below is a sample from an XML file from my Response window of my project. I need to create a groovy assertion that will parse through the XML response file and compare the "Event" (looking for the sa...
  • richie's avatar
    richie
    5 years ago

    Hey TheEnd 

     

    Ok - firstly - I need to point out - I'm not the best person to comment on this - my groovy is nowhere near as good as the other peoples on here (like avidCoder, nmrao etc. - they'll be able to do this far quicker than I can. 

    I think I can probably work it out - I've already found a groovy time method that you might need - but the coders I mentioned above would probably do this in pure groovy - whereas what I'd do is extract the values from the response, save them to a properties step and use some groovy (that Rao gave me actually!) to compare the 2 values against each other - the complication with this is that time isn't decimal (I think the phrase is sexagesimal - but dont quote me) - so during the comparison I still need to treat the extracted values saved in the property files as time values and not strings (property values are stored as strings).

     

    I'll start working on this tomorrow - but by the time I've worked out an answer avidCoder or nmrao  will have likely worked out the answer between coffee breaks - for me it'll probably be a days work.

     

    Actually I've changed my mind - I think pure groovy is probably easier

     

    Couple more questions to help guide:

    Q1.  The response - are you saying for Event=x (where polling interval = 10secs) - the response will have numerous records contained - 1 record for each 10second interval since the initial call was made? - cos this makes it more awkward - you'll need to assert that EVERY record is 10 seconds greater than previous - I haven't got any bright ideas on how to do this at this point - maybe extract the lot into an array and parse that - but even then - this is gonna be a problem - every day has 8640 10second intervals - does this mean if you don't run your test for a day - you're gonna have a response with 8640 individual records (considring there's 86400 seconds in a day)?

    OR - are you content considering typical extrapolation rules (number of extrapolates to determine a pattern) maybe only 4 data points is enough to assert against?

     

    WOW! - you really didn't start with an easy one - did you? ;)

     

    As I mention above - I can probably work out how to assert that one eventtime is 10seconds greater than previous but depending on your answer to Q1 - this might exclude me from helping out - leaving it to the other fellas/ladies on here

     

    nice one,

     

    rich

TheEnd's avatar
TheEnd
Occasional Contributor

Ok, thanks Rich, let me try to explain this better:

NOTE: a Test step before this Test step(which I explain below) sets the polling interval (in this example to 10 sec).

1. Using an HTTP GET request call on a URL

2. The URL’s response is a list of events (<Event>) that have time stamps (<EventTime>)

3. These events, Event X, Event Y etc., are no more than polling events. So, if I send a polling interval for Event X to poll every 10 sec, then I want to verify that Event X is polling every 10 sec. Event Y could be polling at a different interval, no problem. I need to verify if I set the polling interval for Event X to be 10 sec, then when I send a GET on the URL, in the response I should see the time stamps for Event X to be 10 sec apart.

4. So, my Assertion should compare Event X with time stamp X and the next time that Event X polls the time stamp should be 10 sec from the previous Event X time stamp. Verifying polling interval was set correctly.

5. Example below shows there is a 10 sec diff between the Event X at 19:35:37.189 time and the same Event X at 19:35:47.24

<Response>

<e>
<Tplus>8201.19</Tplus>
<SinceLast>8.29</SinceLast>
<EventTime>2019-12-16T19:35:37.189</EventTime>
<Event>trapPATS-NE-MIB: patsConfigFileDownloadCompleteTrap"/test_lru_manifest.xml"XX.XX.XX.162</Event>
</e>
<e>
<Tplus>8211.24</Tplus>
<SinceLast>10.05</SinceLast>
<EventTime>2019-12-16T19:35:47.24</EventTime>
<Event>trapPATS-NE-MIB:patsConfigFileDownloadCompleteTrap"/test_lru_manifest.xml"XX.XX.XX.162</Event>
</e>

<Response>

6. Trying to verify the polling request was set correctly. If there is a better way than a groovyscript, please point me into that direction. But if the groovyscript is the way please provide code on how to do this and an explanation into what the code is doing, this way I can learn, until I can get more experience with groovy.

7. To start with, not sure if I should go to the end of the response file or parse through the entire response file?

Thanks, again, all help is greatly appreciated!

richie's avatar
richie
Community Hero
5 years ago

Hey TheEnd 

 

Ok - firstly - I need to point out - I'm not the best person to comment on this - my groovy is nowhere near as good as the other peoples on here (like avidCoder, nmrao etc. - they'll be able to do this far quicker than I can. 

I think I can probably work it out - I've already found a groovy time method that you might need - but the coders I mentioned above would probably do this in pure groovy - whereas what I'd do is extract the values from the response, save them to a properties step and use some groovy (that Rao gave me actually!) to compare the 2 values against each other - the complication with this is that time isn't decimal (I think the phrase is sexagesimal - but dont quote me) - so during the comparison I still need to treat the extracted values saved in the property files as time values and not strings (property values are stored as strings).

 

I'll start working on this tomorrow - but by the time I've worked out an answer avidCoder or nmrao  will have likely worked out the answer between coffee breaks - for me it'll probably be a days work.

 

Actually I've changed my mind - I think pure groovy is probably easier

 

Couple more questions to help guide:

Q1.  The response - are you saying for Event=x (where polling interval = 10secs) - the response will have numerous records contained - 1 record for each 10second interval since the initial call was made? - cos this makes it more awkward - you'll need to assert that EVERY record is 10 seconds greater than previous - I haven't got any bright ideas on how to do this at this point - maybe extract the lot into an array and parse that - but even then - this is gonna be a problem - every day has 8640 10second intervals - does this mean if you don't run your test for a day - you're gonna have a response with 8640 individual records (considring there's 86400 seconds in a day)?

OR - are you content considering typical extrapolation rules (number of extrapolates to determine a pattern) maybe only 4 data points is enough to assert against?

 

WOW! - you really didn't start with an easy one - did you? ;)

 

As I mention above - I can probably work out how to assert that one eventtime is 10seconds greater than previous but depending on your answer to Q1 - this might exclude me from helping out - leaving it to the other fellas/ladies on here

 

nice one,

 

rich

  • TheEnd's avatar
    TheEnd
    Occasional Contributor
    5 years ago

    Thanks Rich,

    @avidCoder, @nmrao

    Is it possible that one of you could help me with my issue? I'll post again:

    NOTE: a Test step before this Test step(which I explain below) sets the polling interval (in this example to 10 sec).

    1. Using an HTTP GET request call on a URL

    2. The URL’s response is a list of events (<Event>) that have time stamps (<EventTime>)

    3. These events, Event X, Event Y etc., are no more than polling events. So, if I send a polling interval for Event X to poll every 10 sec, then I want to verify that Event X is polling every 10 sec. Event Y could be polling at a different interval, no problem. I need to verify if I set the polling interval for Event X to be 10 sec, then when I send a GET on the URL, in the response I should see the time stamps for Event X to be 10 sec apart.

    4. So, my Assertion should compare Event X with time stamp X and the next time that Event X polls the time stamp should be 10 sec from the previous Event X time stamp. Verifying polling interval was set correctly.

    5. Example below shows there is a 10 sec diff between the Event X at 19:35:37.189 time and the same Event X at 19:35:47.24

    <Response>

    <e>
    <Tplus>8201.19</Tplus>
    <SinceLast>8.29</SinceLast>
    <EventTime>2019-12-16T19:35:37.189</EventTime>
    <Event>trapPATS-NE-MIB: patsConfigFileDownloadCompleteTrap"/test_lru_manifest.xml"XX.XX.XX.162</Event>
    </e>
    <e>
    <Tplus>8211.24</Tplus>
    <SinceLast>10.05</SinceLast>
    <EventTime>2019-12-16T19:35:47.24</EventTime>
    <Event>trapPATS-NE-MIB:patsConfigFileDownloadCompleteTrap"/test_lru_manifest.xml"XX.XX.XX.162</Event>
    </e>

    <Response>

    6. Trying to verify the polling request was set correctly. If there is a better way than a groovyscript, please point me into that direction. But if the groovyscript is the way please provide code on how to do this and an explanation into what the code is doing, this way I can learn, until I can get more experience with groovy.

    7. To start with, not sure if I should go to the end of the response file or parse through the entire response file?

    Thanks, again, all help is greatly appreciated!

  • TheEnd's avatar
    TheEnd
    Occasional Contributor
    5 years ago

    Sorry Rich,

    It got a little crazy after I sent out the post to the two individual you mentioned, but I should have answered your questions, which is: I believe I'm content considering typical extrapolation rules (number of extrapolates to determine a pattern) maybe only 4 data points is enough to assert against. And yes, this is a doozy of a problem to start with!

     

    Thanks for all your help