How to disconnect any device that is already connected.
I am trying to connect to BitBar device from TestComplete Run Remote Device window. When I tried to connect to a device from the list, then I am getting the following error message. "Your BitBar account does not allow any more additional connections. Please disconnect any device that is already connected using this account and try again". I couldn't find a menu path to verify if there is an already connected device and to disconnect. Where do I check this? Please guide me.
CrossBrowserTesting to BitBar Selenium Script Migration - QuickStart Guide
On June 21, 2022, SmartBear launched web application testing on our unified cloud testing solution that will include both browser and device testing on the BitBar platform! We have listened to our customers and having one product for both web and device testing will better meet your needs. BitBar is a scalable, highly reliable and performant platform with multiple datacenters. On it, you will have access to the latest browsers and devices with additional deployment options to meet your needs, including private cloud and dedicated devices. For more frequently asked questions about the launch of web app testing on BitBar, visit ourFAQ. This Quickstart Guide is intended to walk through the conversion of your existing CrossBrowserTesting Selenium tests to use BitBar! We have updated Selenium hubs and API calls that will require conversion, though little else will be required. As with CrossBrowserTesting, we have sample scripts and a Selenium Capabilities Configurator you may use to build out the specific capabilities for the desired tested device. This tool can be foundhere. To start conversion, you will need your BitBar API key versus the CrossBrowserTesting Authkey.This is a new method to authenticate the user and to make API calls. You may find your BitBar API Key in account settings as describedhere. Most of the Code examples and talking points for conversion are in reference to the CrossBrowserTesting Selenium Sample script that is availablehere. All code snippets in this article will be in Python. Now that you have your BitBar API Key, let's alter the original Authkey variable with our new BitBar API key located at line 18 in the CrossBrowserTesting sample script. This step is for connection to the BitBar API for processes such as taking screenshots and setting the status of your tests. # Old CrossBrowser Testing Sample Authkey Variable self.authkey = "<"CrossBrowserTesting Authkey">" # New Bitbar API Key Variable self.apiKey = "<"insert your BitBar API Key here">" In regards to the capabilities used in BitBar, there are a couple things to note. First, we do not need to specify a 'record_video' capability as we do in CrossBrowserTesting. Videos are generated automatically for every test, so we no longer need to provide this capability. Doing so will result in webDriver errors.The second thing to note is that we now also pass the BitBar API Key along with the Capabilities; capabilities = { 'platform': 'Windows', 'osVersion': '11', 'browserName': 'chrome', 'version': '102', 'resolution': '1920x1080', 'bitbar_apiKey': '<insert your BitBar API key here>', } With BitBar we now have four Selenium hub options to choose from. Both US and EU Selenium hubs are available to aid in performance for your location. Separate hubs are also provided depending on the type of device (Desktop vs Mobile) you wish to test against. You may pick the applicable Desktop or Mobile hub closest to your location and replace your existing hub with the updated URL; BitBar Desktop Selenium Hubs; US_WEST:DESKTOP: https://us-west-desktop-hub.bitbar.com/wd/hub EU:DESKTOP: https://eu-desktop-hub.bitbar.com/wd/hub BitBar Mobile Selenium Hubs; US_WEST:MOBILE: https://us-west-mobile-hub.bitbar.com/wd/hub EU:MOBILE: https://eu-mobile-hub.bitbar.com/wd/hub # start the remote browser on our server self.driver = webdriver.Remote desired_capabilities=capabilities command_executor="https://us-west-desktop-hub.bitbar.com/wd/hub" Now that we have our BitBar API Key, and Capabilities and Selenium Hub set up, we can move on to altering our requests for Screenshots and Test Result Status. In the CrossBrowserTesting sample script, we use standalone API requests to create Screenshots. For the BitBar sample scripts, we are doing this with the Selenium driver itself to create the Screenshot and store it locally. Afterwards use the BitBar API to push the locally saved image back to our project. The swagger spec for our BitBar Cloud API can be foundhere. In line 30 of the BitBar Selenium sample script we set a location to store Screenshots on the local machine. Note, this is set up to store files in a directory called 'Screenshots' in the root folder of your project. self.screenshot_dir = os.getcwd() + '/screenshots' To retrieve a Screenshot and store it, we perform a 'get_screenshot_as_file' call, as seen on line 45 in the BitBar Selenium example script. self.driver.get_screenshot_as_file(self.screenshot_dir + '/' + '1_home_page.png') Now we want to to take our Screenshot and push it back to our project in BitBar. Note that in this case for Python, we are using the 'httpx' module for the API calls back to BitBar. The 'requests' module only supports HTTP 1.1 and we will need a module capable of handling HTTP 2/3 requests. # Let's take our locally saved screenshot and push it back to BitBar! # First we start by declaring the 'params' and 'files' variables to hold our Screenshot name and location. params = { 'name': self.screenshotName1, } files = { 'file': open(self.screenshot_dir + '/' + self.screenshotName1, 'rb'), } # Now we build out our API call to push our locally saved screenshot back to our BitBar Project print("Uploading our Screenshot") response = httpx.post('https://cloud.bitbar.com/api/v2/me/projects/' + self.projectID + '/runs/' + self.RunId + '/device-sessions/' + self.deviceRunID + '/output-file-set/files', params=params, files=files, auth=(self.apiKey, '')) # Here we check that our upload was successfull if response.status_code == 201: print("Screenshot Uploaded Successfully") else: print("Whoops, something went wrong uploading the screenshot.") The final piece of the puzzle is to set our Test Result Status. We have alternate naming conventions for test results, these are 'Succeeded' and 'Failed' for BitBar vs 'Pass' and 'Fail' for CrossBrowserTesting. # CrossBrowserTesting Successful test syntax self.test_result = 'pass' # CrossBrowserTesting Failed test syntax self.test_result = 'fail' # BitBar Successful test syntax self.test_result = 'SUCCEEDED' # BitBar Failed test syntax self.test_result = 'FAILED' Note that in the snippet provided below, we start by performing Get requests for session information. These requests are sent to the same Selenium Hub we are using for the webDriver, so make sure the hub address is set to the same hub used for webDriver. We would recommend to turn this into a variable to avoid having to switch this manually for alternate hubs. These processes are found in the 'tearDown' function of the updated CrossBrowserTesting sample script foundhere. #get all necessary IDs of current session response = requests.get('https://us-west-desktop-hub.bitbar.com/sessions/' + self.driver.session_id, auth=(self.apiKey, '')).json() deviceRunID = str(response["deviceRunId"]) projectID = str(response["projectId"]) RunId = str(response["testRunId"]) Finally, we set the Test Result with the Post method below using session information retrieved with the Get request above. Note, the URL for the Post request will NOT need to be updated to reflect the specific Selenium hub in use. # Here we make the api call to set the test's score requests.post('https://cloud.bitbar.com/api/v2/me/projects/' + projectID + '/runs/' + RunId + '/device-sessions/' + deviceRunID, params={'state': self.test_result}, auth=(self.apiKey, '')) Now that we have made these changes you are ready to run your test through BitBar! As a summary, we replace our CrossBrowserTesting authKey with the BitBar API Key, set the new Selenium hub address, build new screenshot calls and update the test result function. Quick Reference Documentation; BitBar WebFAQ. Complete documentation with code samples in various languages are foundhere. Retrieve your BitBar API Key in account settings as describedhere. BitBar Selenium Capability Configurator and Sample Scripts are foundhere. CrossBrowserTestingCapability Configurator and Sample Scripts are foundhere. The Swagger spec for our BitBar Cloud API can be foundhere. Here is our complete Python CBT-BB conversion script; # Please visit http://selenium-python.readthedocs.io/ for detailed installation and instructions # Getting started: http://docs.seleniumhq.org/docs/03_webdriver.jsp # API details: https://github.com/SeleniumHQ/selenium#selenium # Requests is the easiest way to make RESTful API calls in Python. You can install it by following the instructions here: # http://docs.python-requests.org/en/master/user/install/ import unittest from selenium import webdriver import requests import os import httpx class BasicTest(unittest.TestCase): def setUp(self): #get rid of the old way of doing auth with just an API key self.apiKey = '' self.api_session = requests.Session() self.test_result = None self.screenshot_dir = os.getcwd() + '/screenshots' self.screenshotName1 = 'SS1.png' self.deviceRunID = "" self.projectID = "" self.RunId = "" #old platformName has been split into platformName and osVersion capabilities = { 'bitbar_apiKey': '', 'platform': 'Linux', 'osVersion': '18.04', 'browserName': 'firefox', 'version': '101', 'resolution': '2560x1920', } # start the remote browser on our server self.driver = webdriver.Remote( desired_capabilities=capabilities, #the hub is changed, also not sending the user and pass through the hub anymore #US hub url: https://appium-us.bitbar.com/wd/hub command_executor="https://us-west-desktop-hub.bitbar.com/wd/hub" #EU hub url ) self.driver.implicitly_wait(20) def test_CBT(self): # We wrap this all in a try/except so we can set pass/fail at the end try: # load the page url print('Loading Url') self.driver.get('http://crossbrowsertesting.github.io/selenium_example_page.html') # maximize the window - DESKTOPS ONLY #print('Maximizing window') #self.driver.maximize_window() #check the title print('Checking title') self.assertEqual("Selenium Test Example Page", self.driver.title) # take a screenshot and save it locally print("Taking a Screenshot") self.driver.get_screenshot_as_file(self.screenshot_dir + '/' + self.screenshotName1) # change pass to SUCCEEDED self.test_result = 'SUCCEEDED' except AssertionError as e: # delete cbt api calls # change fail to FAILED self.test_result = 'FAILED' raise def tearDown(self): print("Done with session %s" % self.driver.session_id) if self.test_result is not None: #get all necessary IDs of current session response = requests.get('https://us-west-desktop-hub.bitbar.com/sessions/' + self.driver.session_id, auth=(self.apiKey, '')).json() self.deviceRunID = str(response["deviceRunId"]) self.projectID = str(response["projectId"]) self.RunId = str(response["testRunId"]) # Here we make the api call to set the test's score requests.post('https://cloud.bitbar.com/api/v2/me/projects/' + self.projectID + '/runs/' + self.RunId + '/device-sessions/' + self.deviceRunID, params={'state': self.test_result}, auth=(self.apiKey, '')) # let's take our locally saved screenshot and push it back to BitBar! # First we start by declaring the 'params' and 'files' variables to hold our Screenshot name and location. params = { 'name': self.screenshotName1, } files = { 'file': open(self.screenshot_dir + '/' + self.screenshotName1, 'rb'), } # Now we build out our API call to push our locally saved screenshot back to our BitBar Project print("Uploading our Screenshot") response = httpx.post('https://cloud.bitbar.com/api/v2/me/projects/' + self.projectID + '/runs/' + self.RunId + '/device-sessions/' + self.deviceRunID + '/output-file-set/files', params=params, files=files, auth=(self.apiKey, '')) # Here we check that our upload was successfull if response.status_code == 201: print("Screenshot Uploaded Successfully") else: print("Whoops, something went wrong uploading the screenshot.") self.driver.quit() if __name__ == '__main__': unittest.main(warnings='ignore') Thanks for reading along, I hope this helps your conversion to BitBar! Happy Testing!
