Forum Discussion

stein_oddvar_ra's avatar
stein_oddvar_ra
Contributor
9 years ago
Solved

What ports need to be open for the license server to work?

Recently our testcomplete license server was moved inside a firewall. Port 1947 has been opened for access but still I cannot get a floating license to a TestExecute client from outside the firewall.

 

Is there any ports in addition to 1947 that needs to be opened in the firewall for the licensing to work?

 

Regards,

 

Stein O. Rasmussen

  • joseph_michaud's avatar
    joseph_michaud
    9 years ago

    No, port 1947 should be sufficient.  By default you need both TCP and UDP unblocked.

     

    Assuming your server is working OK:

    On the Access to Remote License Managers configuration page on the client ( http://localhost:1947/_int_/config_to.html ) try adding the IP address of the server to the Remote License Search Parameters box and  select Aggressive Search.  (click Submit) and give it a few minutes.  The server should show up on the Sentinel Keys page ( http://localhost:1947/_int_/devices.html ).

     

    You can test if TCP is blocked by trying to connect directly to the Admin Control Center of the server.

    On the client browse to: http://<IP_address_of_server>:1947

     

    If you get a page or an active denial, you're not blocked.  If you get a timeout, you're blocked.

4 Replies

Sort By
  • joseph_michaud's avatar
    joseph_michaud
    Moderator
    9 years ago

    No, port 1947 should be sufficient.  By default you need both TCP and UDP unblocked.

     

    Assuming your server is working OK:

    On the Access to Remote License Managers configuration page on the client ( http://localhost:1947/_int_/config_to.html ) try adding the IP address of the server to the Remote License Search Parameters box and  select Aggressive Search.  (click Submit) and give it a few minutes.  The server should show up on the Sentinel Keys page ( http://localhost:1947/_int_/devices.html ).

     

    You can test if TCP is blocked by trying to connect directly to the Admin Control Center of the server.

    On the client browse to: http://<IP_address_of_server>:1947

     

    If you get a page or an active denial, you're not blocked.  If you get a timeout, you're blocked.

    • stein_oddvar_ra's avatar
      stein_oddvar_ra
      Contributor
      9 years ago

      The solution was as simple as it was stupid. The IT-department had opened port 1948 instead of 1947. When 1947 was opened, the licensing worked perfectly.

       

      Thank you for your patience.

    • stein_oddvar_ra's avatar
      stein_oddvar_ra
      Contributor
      9 years ago

      Yes, it does. But unfortunately it talks about windows firewalls on the clients and servers. I am struggling with a firewall in between the clients and server.