Forum Discussion

wmtan01's avatar
wmtan01
Contributor
5 years ago
Solved

Re: 14.3 -> 14.4 Upgrade Project Compatibility?

I recently upgraded to 14.4 but our project is taking forever to open. Is this normal and did you guys encounter this?   When we upgraded from 12 to 14 I dont remember it taking this long. I'm curr...
  • wmtan01's avatar
    wmtan01
    5 years ago

    We figured it out, apparently 14.40 could not load some KWTs that were in to 50+MB file size. also our fault for letting our KWT get to that level. Removing it from the KeywordTests.tcKDT file fixed it.

     

    Thanks for the suggestions!

Marsha_R's avatar
Marsha_R
Champion Level 3
5 years ago

Is it the first time you've opened the project since you've done the upgrade?  If not, is it taking a long time every time?

 

You might take a look and see if you have a lot of log files or image files saved.  Those can take a long time to load.

  • wmtan01's avatar
    wmtan01
    Contributor
    5 years ago

    It is the first time im opening it since upgrading.

     

    I opened the project before upgrading and it was fine. not sure whats causing this :(

    • wmtan01's avatar
      wmtan01
      Contributor
      5 years ago

      We figured it out, apparently 14.40 could not load some KWTs that were in to 50+MB file size. also our fault for letting our KWT get to that level. Removing it from the KeywordTests.tcKDT file fixed it.

       

      Thanks for the suggestions!