Forum Discussion

AndrewCast's avatar
AndrewCast
Contributor
6 years ago
Solved

Converting NameMapping to "new" application

We're currently working on migrating from 32 to 64, and I'm trying to set up TC for the 64 bit version. The mapping for everything seems to have been only for the 32 bit application though, and 64 is...
  • tristaanogre's avatar
    tristaanogre
    6 years ago

    Some suggestions to go along with what cunderw  mentions:

     

    1) Look into using wildcards if possible to mask out portions of the properties so that they can be identified in both 32 and 64 bit.

    2) Alternatively, look into "conditional mapping" where you can use IF/AND/OR logic in the property selections.

     

     

cunderw's avatar
cunderw
Community Hero
6 years ago

What does the mapping properties look like for your objects? I'm guessing there is a property in there that changes between the two versions that could be adjusted to work with both. 

  • tristaanogre's avatar
    tristaanogre
    Esteemed Contributor
    6 years ago

    Some suggestions to go along with what cunderw  mentions:

     

    1) Look into using wildcards if possible to mask out portions of the properties so that they can be identified in both 32 and 64 bit.

    2) Alternatively, look into "conditional mapping" where you can use IF/AND/OR logic in the property selections.

     

     

    • AndrewCast's avatar
      AndrewCast
      Contributor
      6 years ago

      Wildcards: Looks like code changes, which might be the more reasonable route for future maintenence, but the differences in WndClass are too broad and might pick up too much

       

      Conditional Mapping: This might work, is there a way to do this in bulk, or will I have to go through them one by one? I can go through the (I believe it was-) JSON file and simply place a conditional everytime I see a match 

       

      Thank you for letting me know about these!

  • AndrewCast's avatar
    AndrewCast
    Contributor
    6 years ago

    The difference is that the WndClass changed from

     

    Afx:00400000:800*

    to 

    Afx:0000000140000000:b*

    but there might be more. Is there a way to TC to pick up all such WndClass to merge with the old ones?

    • tristaanogre's avatar
      tristaanogre
      Esteemed Contributor
      6 years ago

      Based upon the WndClass change... yeah, I think Conditional Mapping may be your best bet.

      Unfortunately, the only SANCTIONED way for doing so is via the IDE of TestComplete.  You COULD try and do it in the NameMapping.tcNM file itself... but that's a rather complex file and I would not recommend it.

      • AndrewCast's avatar
        AndrewCast
        Contributor
        6 years ago

        Just noting for anyone who stumbles upon this thread, I have messed around with the .tcNM file before and it worked. I'll do so again and report in case anyone wants to perform the same method. I should note that you should only mess around with these things if you have backups.

         

        Thanks Robert!

         

        EDIT: Anyone coming across this, I would recommend (if possible) to find all mismatches in the program. Then use a program such as VS Code to replace them with a WildCard as recommended above. Conditional works too, but if you can use wildcards would save you a lot more time.