cancel
Showing results for 
Search instead for 
Did you mean: 

ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

SOLVED
Highlighted
Occasional Contributor

ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

ReadyAPI freezes when saving project (both save & save as). 

It seems that the appication creates and writes everything to a temp file (project-tem-xxxxx) and then trying to write back to the original project file (some bytes writes back but not everything) and the whole application is freezing. 

This is as you understand very serious issue with the application so it should be fixed ASAP.

I have tried a maintenance and older version and the same problem occurs.

I suspect that it has something to do with the enviroment and the computer settings.

I'm using a Lenovo Thinkpad and other settings could be find in the attached pictures.

 

PC-Settings.PNGSoapUI-Issue-On-Saving.PNG

 

Hope you fix the bug or assist a work around if there is any.

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Community Manager

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

Thank you everyone for participation in this thread!

 

@Nasseredin I don't think this has something to do with the project size to be honest. Try disabling the following option and let us know if it helps (the screenshot I have at the moment is for an older version):2019-08-12_1754.png

 

If this doesn't help, please make sure to open a support case and send your project to the support team, thank you!


Sonya Mihaljova
Community and Education Specialist

Did my reply answer your question? Give Kudos or Accept it as a Solution to help others. ⬇️⬇️⬇️

View solution in original post

12 REPLIES 12
Highlighted
Community Hero

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

You can open support case of the the issue is happening persistently.

Does it. Also happen if an empty project is created and saved, then try building the tests?

Is your current project simple or composite? And how big

Have you tried increasing max heap size in . vmoptions file? May be worth to try if not already.

Was this project working smoothly in earlier version?


Regards,
Rao.
Highlighted
Occasional Contributor

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

You can open support case of the the issue is happening persistently.

 

Answer: It happens 9 times of 10 

 


Does it. Also happen if an empty project is created and saved, then try building the tests?

 

Answer: No.

Is your current project simple or composite? And how big 

 

Answer: The project is a simple project ca. 11.5 MB

Have you tried increasing max heap size in . vmoptions file? May be worth to try if not already.

 

Answer: Yes.


Was this project working smoothly in earlier version?

 

Answer: On the current PC none of the earlier version is working properly. The same project works without any issue on antoher PC also Lenovo Thinkpad but with dubble RAM. So I think that ReadyAPI has problem memory issue when it come to PC with 16 GB RAM och less.

 

 

 

 

Highlighted
Community Hero

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

Oh, that is big project. If possible have 4gb as max heap size and see if it helps.


Regards,
Rao.
Highlighted
Occasional Contributor

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

I have the following settings in vmoptions

-XX:MinHeapFreeRatio=20
-XX:MaxHeapFreeRatio=40
-Xms8G
-Xmx10G
But it does not help!

Highlighted
Community Leader

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

@Nasseredin :

 

Yes it happens when a project is too big, i think you should connect with Support team to get it resolved

Have you tried to remove if any attachment you have cached in your project. Hope it will help.

 


Click "Accept as Solution" if my answer has helped, and remember to give "kudos" 🙂

Thanks and Regards,
Himanshu Tayal
Highlighted
Community Hero

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

Ok. Please make sure only required project is open and Close rest of them.


Regards,
Rao.
Highlighted
Community Leader

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

@TanyaGorbunova and @sonya_m  :

 

do we have any option in SoapUI where we can reduce the size of our porject if it is too large.

 

As in this case the project size is around 10 MB, which i am also seeing 1st time as currently my project size is around 1 MB but it can a good learning for future if project size gets increase this much.

 


Click "Accept as Solution" if my answer has helped, and remember to give "kudos" 🙂

Thanks and Regards,
Himanshu Tayal
Highlighted
Community Hero

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

If I were to do, split the project into multiple logical parts. Of course, each project needs to have the same wsdl / rest service definitions as the test cases referring them.

But, the issue comes in the maintenance such updating the resources / service definitions etc., and making these changes manually. So, have some utility programs which does this kind of tasks.



Regards,
Rao.
Highlighted
Community Leader

Re: ReadyAPI 3.1.0 (and also older versions) freezes when saving project (both save & save as)

Yesterday, i was pushing my work to Git and then i encountered 1 thing :

 

1. Earlier push size was around 2 MB

2. Current push size is around 10 MB, then i investegated more, then i encountered that in 2 TestCases i have uploaded 1 pdf file, and i have click on ok(attached image pop-up), which increases the size of my project,

 

and as i delete that file, again the size of project gets reduced to 2 MB. So, this is my finding on how the size of project gets incresed.

 

Hope this will help you too in solving your issue.

 


Click "Accept as Solution" if my answer has helped, and remember to give "kudos" 🙂

Thanks and Regards,
Himanshu Tayal
New Here?
Join us and watch the welcome video:
Top Kudoed Authors