# Missing Raw Data

**URL:** <https://community.smartbear.com/t/missing-raw-data/210>\
**Category:** SoapUI OS\
**Tags:** api, soapui, migrated\
**Created:** [December 6, 2013, 3:41pm UTC](https://community.smartbear.com/t/missing-raw-data/210 "2013-12-06T15:41:35Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 6, 2013, 3:41pm UTC](https://community.smartbear.com/t/missing-raw-data/210/1 "2013-12-06T15:41:35Z")

</div>

> Originally posted by **pgrhome** on December 06, 2013

Hello,

I am still quite new to this fascinating tool, but I have done something and I don’t know how to get it back.

Anyway, here goes.

Whilst processing a request, after I had submitted the request to an endpoint, if I clicked on the tab called raw, I would see a representation of what was sent over the wire. But now it has stopped working and all I get is the request headers.

How do I switch this brilliant functionality back on?

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 6, 2013, 7:08pm UTC](https://community.smartbear.com/t/missing-raw-data/210/2 "2013-12-06T19:08:14Z")

</div>

> Originally posted by **MarcusJ** on December 06, 2013

Hello,

It’s possible you may have accidentally modified a setting for this but I haven’t found a setting that does this ![](https://canada1.discourse-cdn.com/flex049/uploads/smartbear_prod/original/1X/5aaddedce26377a1c157230f348187d7ba4d8e8f.gif)  
Try restarting SoapUI and see if it resets back.

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 6, 2013, 7:14pm UTC](https://community.smartbear.com/t/missing-raw-data/210/3 "2013-12-06T19:14:52Z")

</div>

> Originally posted by **SmartBear\_Suppo** on December 06, 2013

This could be a known issue where you have to change the following preferences:

File \> Preference \> Editor Settings tab \> check “Validate Requests”  
File \> Preference \> Editor Settings tab \> check “Validate Responses”

Thanks,  
Michael Giller  
SmartBear Software

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 8, 2013, 4:50pm UTC](https://community.smartbear.com/t/missing-raw-data/210/4 "2013-12-08T16:50:22Z")

</div>

> Originally posted by **pgrhome** on December 08, 2013

I will give it a go and report back.

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 9, 2013, 8:52am UTC](https://community.smartbear.com/t/missing-raw-data/210/5 "2013-12-09T08:52:34Z")

</div>

> Originally posted by **pgrhome** on December 09, 2013

Your a star.

Works perfectly.

Thank you very much.

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 9, 2013, 10:28am UTC](https://community.smartbear.com/t/missing-raw-data/210/6 "2013-12-09T10:28:45Z")

</div>

> Originally posted by **pgrhome** on December 09, 2013

Just a thought thou, I have tested the code and the values that I receive into my WCF interface are not the same as was reported by SoapUI to be sent? Any ideas?

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [December 10, 2013, 2:37pm UTC](https://community.smartbear.com/t/missing-raw-data/210/7 "2013-12-10T14:37:14Z")

</div>

> Originally posted by **SmartBear\_Suppo** on December 10, 2013

Which values are you comparing? Is SoapUI are you looking at the ‘Raw’ request editor and the ‘HTTP Log’ tab at the bottom?

Also where’s the difference; in the message body or headers?

Thanks,  
Michael Giller  
SmartBear Software

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [October 4, 2016, 2:13pm UTC](https://community.smartbear.com/t/missing-raw-data/210/8 "2016-10-04T14:13:04Z")

</div>

> Originally posted by **nkpalli** on October 04, 2016

I am trying to explore SOAP UI tool and created a REST PRoject and trying to Invoke REST API and i get Missing raw response data . I am able to access REST API and get data when invoked via browser

I have checked preference -Editor setting and validate requests and validate responses options are checked in but still give Missing raw response data

Any Idea what else need to be checked ?

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [October 4, 2016, 2:13pm UTC](https://community.smartbear.com/t/missing-raw-data/210/9 "2016-10-04T14:13:35Z")

</div>

> Originally posted by **nkpalli** on October 04, 2016

I am trying to explore SOAP UI tool and created a REST PRoject and trying to Invoke REST API and i get Missing raw response data . I am able to access REST API and get data when invoked via browser

I have checked preference -Editor setting and validate requests and validate responses options are checked in but still give Missing raw response data

Any Idea what else needs to be checked ?

---

<div class="post-metadata">

**Author:** ![system](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@system](https://community.smartbear.com/u/system)\
**Post date:** [April 30, 2019, 6:52am UTC](https://community.smartbear.com/t/missing-raw-data/210/10 "2019-04-30T06:52:24Z")

</div>

> Originally posted by **gracie** on April 29, 2019

Is there another workaround for this?

I have tried setting the following:

File \> Preference \> Editor Settings tab \> check “Validate Requests”  
File \> Preference \> Editor Settings tab \> check “Validate Responses”

but I’m still getting when running load test.

Normal execution works OK.
